Makes Custom
Signs, Nameplates, Labels, Panel Fronts, Metal Decals And Tags
With YOUR Copy, Artwork Or Designs In Your Shop In Minutes!
There Is NOTHING Like This Available On The Internet At A Low
Price Even Approaching The Very Special Price Listed Below For TODAY!
SPECIAL FREE BONUS
And The Sign-O-Matic Even Makes
Stencils That You Can
Use To Etch Metal And Glass Or Use With Paint Or Ink To
Put Your Designs, Artwork Or Copy On Plastic, Wood,
Fabric Or Anything That Will Accept Paint Or Ink.
Check Out The
VIDEO Below To See How Easy It Is To Use!
Make Signs And Labels Like These
In Minutes Using Your
Computer And The SIGN-O-MATIC!
CALL OR E-MAIL FOR SAMPLES!
JUST
THINK OF ALL THE USES YOU CAN FIND IN YOUR PLANT FOR THESE
PROFESSIONAL SIGNS, LABELS, DECALS, TAGS AND NAMEPLATES AND
BY USING THE STENCILS YOU CAN MAKE ALSO
THE POSSIBILITIES ARE ENDLESS !
TO MAKE ALUMINUM LABELS, DECALS, SIGNS,
TAGS & NAMEPLATES IN TWO COLORS: RED &
BLUE, ON ALUMINUM
YOU CAN EVEN "GANG" YOUR LABELS
ON ONE SHEET TO SAVE TIME!
ALL INSTA-MARK
SHEETS ARE 10" X 12" AND COME WITH A
HEAVY-DUTY
3M HI-PERFORMANCE ADHESIVE
ON THEBACK.
INSTA-MARK
SHEETS ARE .007" THICK AND CAN BE EASILY
CUT WITH A PAPER CUTTER OR SCISSORS.
Video Below: See How
To Make Signs With The Sign-O-Matic!
MAKING
CUSTOM SIGNS & LABELS
HERE IS HOW YOU DO IT IN MINUTES IN YOUR OWN SHOP!
Your Artwork...First Make Your Copy On Your
Computer. You Can Make Any Black And White Line Drawing, Logo, Trademark
or Simple Message You Wish. Do NOT Use Colored Ink As It
Does Not Work Well With U.V. Light. (Also Photos Don't Work.
Transparency...Next Print Out Your Copy On A
Transparency (Which Comes In The Kit) And Place The
Transparency Copy On Your Choice Of Sign Material (Which
Comes In The Kit)
Glass Compression Plate...Place
The Heavy Duty Glass Plate On Top Of Transparency And
Sign or Label Sheet To Hold In Place While Exposing To
Ultra-Violet Light. (The U.V. Light Will NOT Hurt You But You Should Not Spend Time Looking At It.
Timer...Next, Set Your Timer For 3 Minutes And Turn
On The Exposure Unit. After 3 Minutes Turn Off The Sign-O-Matic And Remove The Aluminum Sheet.
Develop...Wash Your
Sign or Label Very Gently In Plain Water For About 30 Seconds To A
Minute Using A Soft White Sponge Found In The Kit.
NEXT...In SECONDS You Will See The Sign
Appear Like Magic As You Gently Wash It!
Dryer...The Last
Step Is To Dry Your Sign Or Label.
(Note: You Can Put The Aluminum Sheet Back In
The Sign-O-Matic After It Is Dry For About 3 Minutes To "HARDEN" The Surface To Get Longer Wear Or Use An "Overlay Sheet" Found Below.
Ready To Use...
All
Finished In Less Than 5 Minutes!
And Remember It Also Makes
Stencils That Let You Etch Metal & Glass And Paint On Wood, Plastic, Fabric Or
Anything That Will Take Paint! (Click Here For More Info On Stencils)
Video Below:
Today's Special Deal
SIGN-O-MATIC KIT
(MAKES SIGNS,
LABELS AND STENCILS FOR MARKING ANYTHING)
SIGN-O-MATIC KIT CONTENTS
1 UV Exposure
Unit in Aluminum Frame Measuring
10"x12"x12" High with Electric
Cord, Switch and Special 365
Nanometer Ultra-Violet Bulb (120
Watts)
1 Aluminum
Exposure Tray with Compression
Foam and Glass Top
1-16oz.
Bottle Stencil Developer
1 Plastic
Developing Tray with Lid
4 White
Developer Sponges
1 Digital
Timer
1-10 Pak 10"x12"
Aluminum Insta-Mark Sheets
1-5 Pak
10"x12" Overlay Sheets
10 Sheets
Transparency Film For Your Copy
(8 1/2"x 11")
2 FREE
Samples of Universal Stencils
Complete
Instructions
COMBO KITS SHOWN BELOW ARE ON SPECIAL TODAY!
Regular Price $399.95
(You Save $100.00) TODAY!
On Special Today Only
$299.95 (Note: We Do Not Guarantee This Price Will
Be Available Tomorrow...Don't Miss It!)
Sign-O-Matic Was Recently Featured On
National Television On The DIY Network
Showing The Easiest Way To Make Quick
Inexpensive, Yet High Quality, Signs!
To See The Video
Just Click Below!
Below Are Clear Protective Overlay Sheets That You Put On
Your Signs or Labels To Protect Them From Scratches Or From Excess Sunlight Outside.
It Makes Your Signs, Labels or Nameplates Last Much Longer.
