ETCH-O-MATIC
MARKS KNIVES, SWORDS & CUTLERY
WITH YOUR COPY, DESIGNS OR TRADEMARKS IN SECONDS FOR PENNIES!
Video Below:
Here's A Preview Of What
The Etch-O-Matic Can Do For You!
Here Is How You Mark A Knife
Here Are Examples Of Electro-Chemical Marking That You Can Easily Do In
Your Own Shop In Just Seconds! Now All You Do Is Create Your Own Design,
Logo, Trademark Or Brand Name And Then Put It On Your Knives,
Swords, Cutlery,
Multi-Tools, Or
Leatherman Tools For Less Than A Cent Per Mark.
It Is Easy, Quick, Cheap, Professional And YOU Can Do It...In Seconds!
You Do This By Using The ETCH-O-MATIC And
Any Of Our Dura-Film
Stencil Makers (As Shown Below) To Create Your Own Trademark Stencils
In Less Than 5 Minutes! Simply Follow The Page On Down And See The
Whole Process Explained In Detail. Here Are A Few Examples To Show
You What The Marks Look Like.
Create Any Design, Trademark Or Brand Name And Etch It On Your Knives In Seconds!
You Can Make Black Marks On Stainless Steel, White Marks On Black Oxide Coatings And Even Deep Etch Marks Down To About 0.003" That Can Be Clear Or Black.
Here Is A Sword And The Dura-Film Stencil That Was Used To Mark It In 3 Seconds.
Now Mark Swords, Daggers, Knives, Cutlery And Anything Metal Including
Tools, Instruments, Metal Parts And Equipment With Marks You Create In
Just Seconds For Pennies. The Etch-O-Matic Can Be Used In Hundreds Of
Ways For Fun And Profit.
ETCHES MARK INTO SURFACE — ETCH-O-MATIC will Etch into the surface
of Anything made of Metal, including Tools, Instruments, Equipment or
Manufactured Parts, anything that can be Typed, Written, Drawn or Photo
Processed on a Special Stencil. This includes Names, Numbers, Designs,
Logos, Trademarks or even Your Own Signature. Using an Electro- Chemical
principle, the New ETCH-O-MATIC can Etch as Deep as .003" of an Inch in
Less than 30 Seconds or Mark the Hardest Tool Steel and Carbides almost
Instantly. It marks any Flat or Round Metal Surface down to 1/16" Diameter
and any Metal Thickness from Thin Foil up to the Largest Castings easily.
Most Marks (which look like Printing or Engraving) take about 3 to 20
Seconds (the Longer Dwell Times are for
Deep Etching)and are Permanently Etched
into the Tool or Manufactured Part.
MARKING WITH GROUND PLATE — Simply Lay the Tool or Part
on the Ground Plate and Touch ETCH-O-MATIC to it for a Few Brief
Seconds and Your Mark is Permanently Etched Into the Surface.
MARKING ROUND SURFACES — Drill Bits, Milling Cutters,
Tubing, Pipe or nearly anything Round can be Easily Marked by
"Rolling" the Mark on as Shown Above.
FAST AND VERY EASY TO USE!
ETCH-O-MATIC is FAST and EASY TO USE. Anyone in Your Organization
can become an EXPERT in JUST MINUTES and produce Professional Looking
Marks Quickly.
In Fact, Etch-O-Matic is by Far the Very Easiest MarkingSystem to Learn that is
Available Today!
Also, You will find that ETCH-O-MATIC is not only the Fastest way to make
Permanent Marks on Anything Metal, but is by Far the LEAST EXPENSIVE
method on the Market Today. Your Marks will Cost just Fractions of a Cent
to Produce and You will be Extremely Pleased with the Result.
MAKES DEEP ETCH MARKS— ETCH-O- MATIC Marks many Metals as
Deep as .003" with Deep Etch Adapter Clip, a Mark that can only be
Removed by Grinding a Major Part of the Surface Away.
BASICALLY, ETCH-O-MATIC and the Electro-Chemical Marking
System has been Proven Over and Over again during our 36 Years in
Business as the Best Way to Permanently Mark Anything Metal.
COMPARES WITH LASER MARKS
Most Marks will Compare Favorably with Laser Marks on Metal and are
Easier and Sometimes
Even Faster to Make. In Fact You have Seen Marks made by
Etch-O-Matic hundreds of times before but probably did
Not Realize it since the Marks are Used so often in Commerce Today. If
you have ever seen a Feeler Gauge,
Drill Bit, Milling Cutter, Saw Blade, Knife Blade, Ball Bearing Race,
Carbide Cutter or Thousands of
other types of Metal Tools, Parts, Instruments or Equipment then You have
probably seen Marks made by
Etch-O-Matic. In fact, we have Marks in a good Percentage of all of
the Cars, Trucks, Commercialand Military Aircraft,
Submarines, Hospital Surgical Instruments and Implant Devices and we even
have Marks in the Nose Cone of the Space Shuttle. (Yes, NASA called
and said that they used an
Etch-O-Matic to Mark an Inspection Date and Number in the Nose Cone of the
Space Shuttles.)
EXAMPLES OF ETCH-O-MATIC MARKS
Black Mark
Etch-O-Matic makes a Black Mark on almost any metal
Deep mark
Etch-O-Matic makes a Clear Deep Etch to .003" on metals
Deep Black Mark
Etch-O-Matic makes a Deep Etch Black Mark on metal
Frosty Mark
Etch-O-Matic makes a Frosty Mark on mirror finish metal
MAKING
DURA-FILM STENCILS Here is How You Make Your Dura-Film
Stencils In About 3 Minutes.
(NOTE: We Are Using Large Type So It Will Photograph Easily.)
Your Artwork...First Make Your Copy On Your
Computer. Here Is A Simple A B C Made Large To Show In
The Photo.You Can Make Any Line Drawing, Logo, Trademark
or Simple Message You Wish. There Is Not Much Limit
Except Photos Are Difficult And Very Thin Lines Are Hard
To Mark.
Transparency...Next Print Out Your Copy On A
Transparency (Which Comes In The Kit) And Place The
Transparency Copy On A Piece Of Unexposed Dura-Film
Stencil (Which Comes In The Kit) And Finally Place A
Glass Plate On Top.
U.V. Exposure Unit...Next Place Tray In The
440 Dura-Film Stencil Maker And Turn On Exposure Unit
For About 3 Minutes.
Develop Your Stencil...Next Remove Stencil
And Develop For 30 Seconds To A Minute. Stencil Is Then
Ready To Use To Mark Your Knives Or Anything Metal.
Permanently Marked...Here We Are Marking A
Saw Blade Since It Is Large Enough To Make A Good Photo.
You Simply Lay The Stencil On The Blade, Wet The Etch-O-Matic
Pad (On Bottom) With Electrolyte, Then Place The Etch-O-Matic
On The Stencil, Ground For A Few Seconds And Then Remove
And Your Blade Is Permanently Marked.
Note: New Universal Stencils are Now Included in Your Kits!
Remember - You Can Etch, Print or Paint on Almost Anything.
Video
Below: Explanation
Of
The Starter & Super Etch-O-Matic Kits
Here Are
The Most Popular Etch-O-Matic Kits
Combined BELOW With The New STENCIL MAKERS For
SPECIAL COMBO OFFERS YOU MUST SEE!
Etch-O-Matic Starter Kit
Lowest Priced Kit available Anywhere, Yet it Does the Job in
Industry, in Plants, Machine Shops and Everywhere Metal Marking is
needed. The Marker Unit is 10 volts, 2 amps and is Excellent
for Light Duty Marking of Tools and Parts. (Transformer is inside
marker unit)
KIT CONTAINS:
ETCH-O-MATIC marker with standard head marking size 7/8" x 13/4",
electrical cord, ground plate, 2 oz. Electrolyte solution in plastic
bottle, 10 special stencils, neutralizer, deep etching adapter clip
and complete instructions. Each kit will make approximately 1,000
marks before refill supplies are needed.
Unit is 110 Volts
standard, but is available in 220 volts for $20 more.
Industrial Price...$119.95
Only $79.95 ON SPECIAL TODAY!
Save $40.00
Today!
Only
$79.95 TODAY!
Etch-O-Matic Super Kit HEAVY DUTY... INDUSTRIAL
QUALITY
BEST VALUE ON THE MARKET TODAY!
NEW SUPER ETCH-O-MATIC is a Powerful, 15-Volt, 10-Amp, Heavy Duty,
Industrial Quality Marking System that can Stand Up to Continuous
Duty, Production Line Marking. It can make Fast A.C. Marks, then
Change Instantly to Deep Etch Marking Down to .003" Deep. It can
make Large Marks 2" x 4" or Larger
(with optional purchase of Medium or Large Grid Kits) for
Trademarks or Etch Hard-to-Mark Coatings like Black Oxide Quickly.
This is a Solid, "No Frills" Etcher that is Priced $200 to $300
BELOW Similar Kits on the Market Today.
KIT CONTAINS:
1 - 15-volt, 10-amp. marker unit with external transformer; adapter
clip for deep etch marking; ground plate; 8-oz. general purpose
electrolyte; 8-oz. neutralizer; extra pads; 100 pak special
stencils; complete instructions and packed in sturdy plastic
carrying case.
Unit is 110 Volts
standard, but is available in 220 volts for $20 more.
Industrial Price $299.95
Only $229.95 ON SPECIAL TODAY!
You SAVE
$70.00 Today!
Only $229.95 TODAY!
SUPER
INDUSTRIAL
KIT
$399.95
REGULAR
INDUSTRIAL
PRICE.
SAVE
$120.00
TODAY!
THE
NEW
SUPER
ETCH-O-MATIC
INDUSTRIAL
KIT
Combines
the
Best
of
Both
of
the
TWO
Kits
Above
and
gives
You
enough
Supplies
to
Mark
Almost
Any
Type
of
Metal
in
the
Average
Plant.
It
also
provides
Great
Value
Because
You
get
the
Starter
Kit
10-volt
/
2-amp
Unit
Included
FREE
in
the
Kit.
Also
Included
is a
Large
2" x
4"
Grid
that
Allows
You
to
Mark
Much
Larger
Areas
at
the
Same
Time.
THIS
IS
REALLY
A
SUPER
VALUE
AT
THIS
LOW
PRICE!
KIT
CONTAINS:1
Super
and
1
Regular
ETCH-O-MATIC
marker
along
with
an
adapter
clip
for
deep
etch
marking,
ground
plate,
8 oz
general
purpose
and
stainless
steel
electrolyte,
two
(2)
100
paks
stencils,
4
oz.
of
aluminum,
black
oxide,
and
brass,
copper
&
bronze
electrolyte,
1
large
2" x
4"
grid
with
stencils
and
pads
to
fit,
8
oz.
neutralizer,
2
neutralizer
powder
paks,
1
extra
regular
grid
and
complete
instructions.
Unit
is
110
Volts
standard,
but
is
available
in
220
volts
for
$20
more.
Industrial Price $399.95
Only $329.95 ON SPECIAL TODAY!
You SAVE
$100.00 Today!
Only $329.95 TODAY!
440 STENCIL MAKER KIT CONTENTS
1 UV Exposure
Unit in Aluminum Frame Measuring
5"x6"x12" High with Electric
Cord, Switch and Special 365
Nanometer Ultra-Violet Bulb (120
Watts)
1 Aluminum
Exposure Tray with Compression
Foam and Glass Top
1-16oz.
Bottle Stencil Developer
1 Plastic
Developing Tray with Lid
2 White
Developer Sponges
1 Digital
Timer
10 Unexposed
Universal Stencils 5"x6"
2 FREE
Samples of Universal Stencils
FOR PRACTICE
5 Sheets
Transparency Film For Your Copy
(8 1/2"x 11")
1 Sample
Glass Etching Kit with Etching
Cream
Complete
Instructions
****NOTE: 440 Stencil Maker is Only
Available In 110 Volt Configuration.****
****If You Use 220 Volts You Will Need a
Step Down Transformer.****
Regular Price $249.95
(You Save $80.00 TODAY) ONLY $169.95 TODAY!
ON SPECIAL TODAY $169.95 We Do NOT Guarantee This Price Will Be
Available Tomorrow!
Today's SPECIAL PRICE...DON'T MISS IT!
Now You Can Combine
The Two Etch-O-Matic Kits Above With
The Mark 440 Stencil Maker Into A COMBO KIT Shown Below
And Receive Even Greater SPECIAL DISCOUNTS FOR TODAY! YOUR SAVINGS
TODAY ARE $140.00 TO $200.00
ON THE COMBO KITS! (Also You Will Qualify For The Special 20% Next Order
Discount!)
MARK 440 U.V.
STENCIL MAKER &
ETCH-O-MATIC STARTER KIT COMBO
Mark 440/Etch-O-Matic Starter
Kit Combo
$229.95
TODAY!
Please
Specify Laser or Inkjet
Transparency Sheets
Kit Contains:Includes Everything in
MARK 440 UV Stencil Maker Kit PLUS
the Etch-O-Matic Starter Kit. You Save $100.00 On The Mark
440 And $50.00 On the Starter Kit for
A Total Savings Today Of $140.00
Off The Industrial Price and $20.00 Off Today's Sales Price
(Also,
You Will Get a 20%
Special Discount Coupon for
Savings On Your Very Next Order for Kits or Supplies.)
MARK 440 U.V.
STENCIL MAKER &
SUPER ETCH-O-MATIC KIT COMBO
Mark 440/Etch-O-Matic
Super Kit Combo
$349.95
TODAY!
Please
Specify Laser or Inkjet
Transparency Sheets
Kit Contains:Includes
Everything in MARK 440 UV Stencil Maker Kit PLUS
the Super Etch-O-Matic Kit. You Save $100.00 On The Mark 440
And $50.00 On the Super Kit for
Total Savings Today Of $200.00 Off The Industrial Price and
$50.00 Off Today's Sales Price. (Also, You Will Get a 20% Special Discount Coupon for
Savings On Your Very Next Order for Kits or Supplies.)
IMPORTANT NOTE: With Each Combo Kit ( Etch-O-Matic &
Stencil Maker Combined)
Purchased Today You Will Receive A 20% Discount Coupon
For Etch-O-Matic Kits Or Supplies ON YOUR VERY NEXT ORDER (NOT THIS
ORDER) We Do
NOT Guarantee This Offer Will Be Available Tomorrow!
DON'T MISS THIS SPECIAL OFFER TODAY!
Today's Special - 20% Coupon Included in COMBO KITS!
/black_mark.gif "Black Mark"){kind=small}
/deep_mark.gif "Deep mark"){kind=small}
/deep_black_mark.gif "Deep Black Mark"){kind=small}
/frosty_mark.gif "Frosty Mark"){kind=small}
