DURA-FILM STENCILS
Now Make Dura-Film Stencils In Minutes!
Dura-Film stencils are very durable, long lasting stencils made with your own artwork. Designs, logos or trademarks are made with your own computer, and one of the four new stencil makers is used with the Etch-O-Matic to mark anything metal such as tools, metal parts or knives! Stencils can also be used to etch glass and can be used with paint on almost anything such as plastic, wood or fabric.
Now you can put professional quality permanent marks on all of your metal parts, products, instruments, equipment or tools with these new Dura-Film stencils that you make right in your own shop using your computer and one of our new stencil makers in just 5 minutes!
Here is the answer to quickly and easily putting top quality trademarks, designs or information on all of your products, manufactured parts, tools or equipment in just seconds! Your marking will look exactly like any of the best commercial marks you have ever seen....and the best part is you can do it for less than one cent per mark!
There is simply nothing on the market today that is quicker and easier to use or less expensive to buy than the etch-o-matic system teamed up with one of these exposure units. You can instantly make marks that look like they were made with the best commercial units available and you can do it all in your own plant or office with your copy on your computer in minutes!
We honestly challenge you to find a better electro-chemical marking deal anywhere!
HERE IS HOW IT WORKS
Make any copy, artwork or drawing on your computer including logos or trademarks (no photo's) and then print your copy out on a sheet of transparency film (included in kit) with your laser or inkjet printer. Then take your transparency copy and put it in either the Mark 440, 560, 680, or the Mark 1000 U.V. Stencil Maker on a sheet of unexposed Dura-Film stencil for 3 minutes. After exposure, develop your dura-film stencil for approximately 60 seconds and you now have a very permanent stencil ready to make hundreds and even thousands of marks with your Etch-O-Matic on anything metal and the marks are extremely professional looking and absolutely permanent.
BEST OF ALL, the marks made with these stencils and with the Etch-O-Matic will meet all military, commercial aircraft, NASA and atomic energy specifications and can be made in seconds on most metals. See info on the Etch-O-Matic above for use of stencils on metal marking.
TWO EXTRA ADDED BONUSES!
(1) These Stencils can be used to etch glass and with paint or ink to paint on plastic, wood, fabric or anything that will accept paint!
(2) You can also make Insta-Mark aluminum signs, labels or nameplates easily in minutes with any of the four stencil makers shown below! (see Sign-O-Matic page.)
Make text copy, designs, artwork or even trademarks on your computer using black and white line drawings (no photos), and then print it out on a transparency film sheet included in kit.
Next put your transparency copy on an unexposed stencil and insert in exposure unit for about 2 minutes be sure and use the timer.
Remove your stencil from exposure unit and remove the clear mylar backing sheets on both sides.
Develop stencil in about 2 minutes, using the liquid developer provided in the kit. After developing the stencil simply blot it dry or air dry stencil with blow dryer.
Then permanently etch anything metal in seconds!
Nothing could be easier and your marks are permanent and professional quality!
Note: you can use these stencils to etch glass and paint on almost anything!
There is even more!
With the same exposure units you can make metal labels, nameplates, signs, tags, and panel fronts in red, blue, black on aluminum. This is a real bonus and you get it free at no extra cost.
Here is a great package of benefits for any business that will pay for itself many times over year after year and this extra bonus costs you absolutely nothing! Be sure and check out our Insta-Mark labels for complete info on making metal labels, signs, nameplates as mentioned above.
There is simply nothing like this on the market today that gives you such freedom to put your own ideas, artwork designs or trademarks on almost anything quickly, easily and for just pennies!
Plus special free bonus
Insta-Mark aluminum labels with adhesive backs for your trial!
Your New 440 Stencil Maker also makes aluminum or polyester labels, tags, signs, nameplates and decals in five colors using your same copy (on your transparency) in 3 minutes. These are perfect for use for labeling almost anything including equipment, displays, shelves, desks, file cabinets, office furniture, machinery, and hundreds more.
In fact some people have even made a business of making labels, nameplates signs, decals, etc. for business, organizations, schools, craft makers and others. This Is just an extra free bonus that you are going to really like!
U.V. Stencil Maker Exposure Units
(NOT Combo Units)
MARK 440 U.V. EXPOSURE UNIT ONLY
MARK 560 U.V. EXPOSURE UNIT ONLY
MARK 680 U.V. EXPOSURE UNIT ONLY
MARK 1000 U.V. EXPOSURE UNIT ONLY
Here Are The Most Popular Etch-O-Matic Kits
Combined below with the new stencil makers for special combo offers you MUST SEE!
Etch-O-Matic Starter Kit
Lowest priced kit available anywhere, and it does the job in industry, in plants, machine shops, and everywhere metal marking is needed. The marker unit is 10 volts, 2 amps, and is excellent for light duty marking of tools and parts. (Transformer is inside marker unit)
KIT CONTAINS: Etch-O-Matic marker with standard head marking size 7/8" x 13/4";
electrical cord; ground plate; 2 oz. electrolyte solution in plastic bottle; 10 special
stencils; neutralizer; deep etching adapter clip; and complete instructions.
Each kit will make approximately 1,000 marks before refill supplies are needed.
Unit is 110 Volts standard, but is available in 220 volts for $20 more.
Etch-O-Matic Super Kit
HEAVY DUTY... INDUSTRIAL QUALITY
BEST VALUE ON THE MARKET TODAY!
NEW Super Etch-O-Matic is a powerful, 15-Volt, 10-Amp, heavy duty, industrial quality marking system that can stand up to continuous duty production line marking. It can make fast A.C. marks, then change instantly to deep etch marking down to .003" deep. It can make large marks 2" x 4" or larger (with optional purchase of medium or large grid kits) for trademarks or etch hard-to-mark coatings like black oxide quickly. This is a solid, "no frills" etcher that is priced $200 to $300 below similar kits on the market today.
KIT CONTAINS: One 15-Volt, 10-Amp. marker unit with external transformer; adapter clip for deep etch marking; ground plate; 8-oz. general purpose electrolyte; 8-oz. neutralizer; extra pads; 100 pak special stencils; complete instructions; and is packed in sturdy plastic carrying case.
Unit is 110 Volts standard, but is available in 220 volts for $20 more.
SUPER INDUSTRIAL KIT
THE NEW SUPER ETCH-O-MATIC INDUSTRIAL KIT combines the best of both of the
two kits above and gives you enough supplies to mark almost any type of metal
in the average plant. It also provides great value because you get the Starter Kit
10-volt / 2-amp Unit included FREE in the kit. Also included is a large 2" x 4" grid
that allows you to mark much larger areas at the same time.
This is an excellent value at this low price!
KIT CONTAINS: 1 Super and 1 Regular Etch-O-Matic marker along with an adapter clip for deep etch marking; ground plate; 8 oz general purpose and stainless steel electrolyte; two (2) 100 paks stencils; 4 oz. of aluminum, black oxide, and brass, copper & bronze electrolyte; 1 large 2" x 4" grid with stencils and pads to fit; 8 oz. neutralizer; 2 neutralizer powder paks; 1 extra regular grid; and complete instructions.
Unit is 110 Volts standard, but is available in 220 volts for $20 more.
440 STENCIL MAKER KIT CONTENTS
ONLY $203.95 TODAY!
- 1 UV Exposure Unit in Aluminum Frame Measuring 5"x6"x12" High with Electric Cord, Switch and Special 365 Nanometer Ultra-Violet Bulb (120 Watts)
- 1 Aluminum Exposure Tray with Compression Foam and Glass Top
- 1-16oz. Bottle Stencil Developer
- 1 Plastic Developing Tray with Lid
- 2 White Developer Sponges
- 1 Digital Timer
- 10 Unexposed Universal Stencils 5"x6"
- 2 FREE Samples of Universal Stencils FOR PRACTICE
- 5 Sheets Transparency Film For Your Copy (8 1/2"x 11")
- 1 Sample Glass Etching Kit with Etching Cream
- Complete Instructions
- ****NOTE: 440 Stencil Maker is Only Available In 110 Volt Configuration.****
- ****If You Use 220 Volts You Will Need a Step Down Transformer.****
Our Special Combination Unit Deals
Now you can combine the two Etch-O-Matic kits above with The Mark 440 Stencil Maker into a COMBO KIT shown below and receive even greater special discounts for today! Also you will qualify for the special 20% next order discount!
MARK 440 U.V. STENCIL MAKER & ETCH-O-MATIC STARTER KIT COMBO
MARK 440 U.V. STENCIL MAKER & SUPER ETCH-O-MATIC KIT COMBO
IMPORTANT NOTE
Today's Special - With each combo kit purchased today (Etch-O-Matic & Stencil Maker Combined) you will receive a 20% discount coupon for Etch-O-Matic kits or supplies ON YOUR VERY NEXT ORDER (NOT THIS ORDER) We do not guarantee this offer will be available tomorrow! DON'T MISS THIS SPECIAL OFFER TODAY!
Martronics Corporation is an expert in etching and marking metal, multi-tools, craft-stencils with paint, and making rubber stamps.
Save money on your auto insurance. Check out our VIN Etching Kits on sale for $14.95.
Our new Glass Etching Kits let you put your artwork on glass in minutes.
The Etch-O-Matic Marking System is an inexpensive alternative to laser etching and laser engraving.