The Etch-O-Matic

The Etch-O-Matic starter kit
The Etch-O-Matic Starter Kit
The Etch-O-Matic starter kit
The Etch-O-Matic Super Kit

PERMANENTLY MARKS ANYTHING METAL IN SECONDS!

The Etch-O-Matic will etch anything that can be typed, written, drawn, or photo processed (on a special stencil) into the surface of anything made of metal: including tools, instruments, equipment, or manufactured parts. Your marks can be names, numbers, designs, logos, trademarks or even your own signature!

Using an electro-chemical principle, the new Etch-O-Matic can etch as deep as .003" of an inch in less than 30 seconds, or mark the hardest tool steel and carbides almost instantly. It marks any flat or round metal surface down to 1/16" diameter and any metal thickness from thin foil up to the largest castings easily. Most marks, which look like printing or engraving, take about 3 to 20 seconds (the longer dwell times are for deep etching) and are permanently etched into the tool or manufactured part surface.

BUY NOW

FAST AND VERY EASY TO USE!

The Etch-O-Matic is fast and easy to use. Anyone in your organization can become an expert in just minutes and produce professional looking marks quickly. In fact, Etch-O-Matic is by far the easiest marking system to learn that is available today! You will also find that Etch-O-Matic, while being the fastest way to make permanent marks on anything metal, is by far the least expensive method on the market today. Your marks will cost just fractions of a cent to produce, and you will be extremely pleased with the result.

Black Mark

MARKING WITH GROUND PLATE

Simply lay the tool or part on the ground plate and touch Etch-O-Matic to it for a few brief seconds and your mark is permanently etched into the surface.

Black Mark

MARKING ROUND SURFACES

Drill bits, milling cutters, tubing, pipe or nearly anything round can be easily marked by "rolling" the mark on as shown above.

Black Mark

MAKES DEEP ETCH MARK

Etch-O-Matic marks many metals as deep as .003" with deep etch adapter clip, a mark that can only be removed by grinding a major part of the surface away.

Black Mark

IT'S THAT SIMPLE

Etch-O-Matic and the electro-chemical marking system has been proven over and over again during our 36 years in business as the best way to permanently mark anything metal.

COMPARES WITH LASER MARKS

Most marks made by the Etch-O-Matic will compare favorably with laser marks on metal, and are easier and sometimes even faster to make. You have very likely seen marks made by Etch-O-Matic hundreds of times before, especially since the marks are used so often in commerce today.

If you have ever seen a feeler gauge, drill bit, milling cutter, saw blade, knife blade, ball bearing race, carbide cutter or thousands of other types of metal tools, parts, instruments or equipment then you have probably seen marks made by the Etch-O-Matic system.

In fact, Etch-O-Matic has created marks in a percentage of all of the cars, trucks, commercial and military aircraft, submarines, hospital surgical instruments and implant devices. Etch-O-Matic has even been used to mark the nose cone of the space shuttle! (Yes, NASA called and said that they used an Etch-O-Matic to mark an inspection date and number in the nose cone of the space shuttles.)

EXAMPLES OF ETCH-O-MATIC MARKS

Black Mark
Black Mark
Etch-O-Matic makes a Black Mark on almost any metal
Black Mark
Deep mark
Etch-O-Matic makes a Clear Deep Etch to .003" on metals
Black Mark
Deep Black Mark
Etch-O-Matic makes a Deep Etch Black Mark on metal
Black Mark
Frosty Mark
Etch-O-Matic makes a Frosty Mark on mirror finish metal

Tool and Equipment Marking

Here are examples of permanent marking that you can easily do in your own shop in just seconds! Now all you do is create your own design, logo or trademark on your computer and then by using a new stencil maker and the Etch-O-Matic you can put it on your tools, metal parts or equipment for less than a cent per mark in seconds! It is easy, quick, inexpensive and professional... and you can do it on you own!


MAKING DURA-FILM STENCILS

Process takes about three minutes
(Note: We are using large type so it will photograph easily).

Black Mark

Your Artwork... First make your copy on your computer. Here is a simple A B C made large to show in the photo. You can make any line drawing, logo, trademark or simple message you wish. There is not much limit except photos are difficult and very thin lines are hard to mark.

Black Mark

Transparency... Next print out your copy on a transparency (which comes in the kit) and place the transparency copy on a piece of unexposed Dura-Film stencil (which also comes in the kit), and finally place a glass plate on top.

Black Mark

U.V. Exposure Unit... Next place the tray in the 440 Dura-Film stencil maker and turn on exposure unit for about three minutes.

Black Mark

Develop Your Stencil... Next remove stencil and develop for 30 seconds to a minute. Stencil is then ready to use to mark your knives or anything metal.

Black Mark

Permanently Marked... Here we are marking a saw blade since it is large enough to make a good photo. You simply lay the stencil on the blade, wet the Etch-O-Matic pad (on bottom) with electrolyte, then place the Etch-O-Matic on the stencil, ground for a few seconds and then remove and your blade is permanently marked.


Here Are The Most Popular Etch-O-Matic Kits
Combined below with the new stencil makers for special combo offers you MUST SEE!

Our Special Combination Unit Deals

Now you can combine the two Etch-O-Matic kits above with The Mark 440 Stencil Maker into a COMBO KIT shown below and receive even greater special discounts for today! Your savings are $140.00 to $200.00 on the combo kits!
Also you will qualify for the special 20% next order discount!


MARK 440 U.V. STENCIL MAKER & ETCH-O-MATIC STARTER KIT COMBO

MARK 440 U.V. STENCIL MAKER & SUPER ETCH-O-MATIC KIT COMBO

IMPORTANT NOTE

Today's Special - With each combo kit purchased today (Etch-O-Matic & Stencil Maker Combined) you will receive a 20% discount coupon for Etch-O-Matic kits or supplies ON YOUR VERY NEXT ORDER (NOT THIS ORDER) We do not guarantee this offer will be available tomorrow! DON'T MISS THIS SPECIAL OFFER TODAY!

twenty percent discount coupon


Martronics Corporation is an expert in etching and marking metal, multi-tools, craft-stencils with paint, and making rubber stamps.

Save money on your auto insurance. Check out our VIN Etching Kits on sale for $14.95.

Our new Glass Etching Kits let you put your artwork on glass in minutes.

The Etch-O-Matic Marking System is an inexpensive alternative to laser etching and laser engraving.